A fresh approach to sustainable construction materials
Construction materials are ubiquitous throughout the world, and their significant CO2 impact requires the urgent development and use of sustainable alternatives. Depending on the required performance, two complementary routes can be followed. The first is to partially or totally replace cement with supplementary cementitious materials (SCMs) or recycled cementitious materials which, once activated, produce the hydration products responsible for the final strength. The second, even greener, route is earthen construction, where the material hardens by drying and its behaviour can be tailored by dispersion–flocculation agents and aggregate packing. Both routes bring new complexity at the physico-chemical level, which governs how these materials can be processed and how they will perform once in place.
To access this complexity, my work relies on rheology as its core method, complemented by other physico-chemical techniques (e.g., XRPD, SEM, PSD, calorimetry) that link the fresh/solid mechanical response to the chemistry and microstructure of the material. Rheology describes how the material behaves both under flow and at rest. In the latter case, small amplitude oscillatory shear (SAOS), imposing a deformation within the linear viscoelastic regime, captures the cohesion and deformability of the early particle network and its eventual build-up over time. Together, these measurements track in time the physico-chemical mechanisms happening at the microscopic scale, which are otherwise difficult to access experimentally through direct measurements.
During this talk, we will explore the chemistry of construction materials: how they behave once water or an activator is added, and how they build up strength through different mechanisms. We will start from the hydration chemistry of cementitious binders containing SCMs, following how cohesion and structuration evolve in time as hydration products form, in order to optimize manufacturing. We will then turn to the mineralogy of clay in raw earth, where drying replaces hydration and strength arises from dispersion–flocculation and particle packing. Hands-on examples from our laboratory activities will illustrate each step, showing how this approach supports the design of sustainable construction materials and opening questions for future developments.
Short bio
Teresa Liberto is Associate Professor of Material Science of Binders at TU Wien, in the Research Unit of Building Materials and Technology. Her research is driven by a simple question: what happens between particles in the first minutes and hours of a material’s life, and how does that decide whether it flows, how it sets, and how it will perform for decades? To find out, she uses rheology as a window into the fresh state, watching cohesion build up as binders made with slag, clay, bricks or recycled concrete hydrate, or as pourable raw earth dries. Her path to construction materials was anything but straight: a chemical engineer by training (BSc and MSc, University of Pisa), she crossed over to physics for her Ph.D. at the University Claude Bernard Lyon 1, within the European doctoral network NanoHeal, studying the physicochemical behaviour of calcite. She joined TU Wien in 2019 as a postdoctoral researcher, went on to a tenure track as Assistant Professor in sustainable cementitious materials, and was promoted to Associate Professor in June 2025. Today she brings this mix of disciplines to her teaching, mentoring and science communication. Want a glimpse inside her lab before the talk? Watch her episode of TU Wien’s video series ‘Women Building Sustainability’.